Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 01/16/22 in all areas

  1. DISCLAIMER: The information disclosed in this guide is only to give insight to roleplayers on LSRP and not to be used in real life This topic itself is meant as an introduction to the 3D printing and P80 world and not meant to be a step by step tutorial The world of firearms is constantly growing at an alarming rate not only over the span of time but especially in the last few years. 3D Printing firearms: The 3D printing world has been overwhelmed with extreme creativity in the recent years, along with 3D printing becoming incredibly affordable for the average man or woman. Originally 3D printed firearms became a trend in Europe due to the extremely strict gun laws. But quickly over time it has flooded into the USA with tons and tons of people making blueprints and making their own firearms straight from their home. Only using minimal amount of tools like a dremel, drill, filer, and sandpaper to fabricate their own "ghost gun" from the comfort of their home or garage. 3D printing has been incorporated into the criminal world heavily due to most criminals are not allowed to own a legal firearm. Most printers nowadays cost about $200-$400 which is really affordable. Along with most prints taking about 1-2 days to fully print Example (open for full-view): A lot of questions asked in the 3D printing world are things like "Can it be traced back to you?": Yes and no, there's always a digital footprint in the internet's world, but there's always ways to cover your tracks, ordering parts to other locations and VPN's are the best way to avoid these issues. "Is it illegal?": Yes, it is illegal to fabricate your own firearms without paying the ATF and allowing them to view everything you make/own. "Is it safe?": Sort of, if you take your time and use the correct material and follow steps accordingly there should not be a single issue. But if you cut corners and try to rush it? There's a chance your print could crack/break/combust. But that is the risk some are willing to make. "Are 3D printed firearms 100% 3D printed?": No, only the lower receiver is printed, the ATF only tracks lower receivers. You have to fill out paperwork when buying a lower receiver from any site/store, printing it cuts out that part. Making a 3D printed firearm deemed a "ghost gun". But 3D printing doesn't just stop at the lower's themselves, it also continues further into special "switches" or "sears" that you can print that turns your firearms into automatics (which could be implemented into your roleplay). A full-auto switch/sear is a small tool made to form either your Glock and/or AR15 from a semi-automatic to fully-automatic. The mechanism itself tricks the firearm into continuous firing instead of resetting the trigger on each shot. (AR AUTO SEAR): (GLOCK AUTO SEAR/SWITCH): Another wildly used method of firearm fabrication are P80 kits, "80% part kits" Similar to 3D printing, P80 kits are another way to fabricate a firearm from the comfort of your own home. You can order a P80 kit straight off the internet, using various tools to mill the lower and form it into your own personal firearm can take up to 3-5 days. Along with the P80's themselves being rated much higher in a safety standard compared to it's 3D printed adversaries. A lot of questions asked about P80 kits are: "Are P80 kits illegal?": No, they are fully legal to order to any location, they are not considered firearms by the ATF. "Are P80 kits safe?": Yes, a much safer alternative to the 3D printing method, extremely safe. "How accessible are P80's?": Super accessible for any normal person, ordering in large amounts could get you flagged. "Are P80 kits 100% plastic?": Yes, the kit itself is an all plastic kit, coming with metal drill bits and an aluminum locking block. "Is a P80 kit an entire firearm?": No, the P80 is only half of the firearm, the rest can be ordered legally off any site, like the lower parts kit, upper parts kit, barrel and slide. Overall, attaining firearms/modifying firearms does not just consist of "smuggling weapons" or "acquiring them from gun-shows", it goes much deeper than that. I hope that the guide itself gives some insight to roleplayers that roleplay around firearms consistently. 3D printing and P80 kits are the new norm in the firearm world, more and more criminals are turning towards these methods of acquiring firearms due to the accessibility and the low risk high reward aspect. Giving food for thought to any of you that are open to creative firearm roleplay. Lastly, I could've given a step by step on how to fabricate these methods, but I would like for you guys to use your knowledge and research icly and be creative. It's all about creativity when it comes to stuff like this, the field is extremely open, enjoy! I'm open to answer any/all questions on this thread as well, and if there's anything you'd like to ask personally, add me on discord [Shmoe Fo#6006]
    5 points
  2. I’d like to see the PD be split between armed and unarmed Officers for realism. Pursuits nowadays don’t really happen, so there should also be very heavy moderation on allowing police to chase people. 90% of cops should be unarmed IMO, and there should be a focus away from policing people IC to allow actual powerful organizations like OC to control the city. Any dangerous situations should also be avoided as PD needs to rp fear of losing life.
    2 points
  3. Most definitely, I live in NY so it's a bit different over in my area. But yes applying for the tax stamp legalizes the firearm in total, and actually in some Southern states I'm pretty sure you can get the sears and such tax stamped as well, just have to go through a ton of paperwork. Appreciate it
    1 point
  4. If you're making NFA items (short barreled rifles/shotguns, suppressors, automatic firearms using auto sears ect) it's illegal without applying for a tax stamp but it's completely legal to otherwise make your own firearms. Good guide and I hope to see more people roleplay around manufacturing firearms.
    1 point
  5. Chili cook-offs too. And I'm not saying that cause I just back from one. Maybe even an event at the fair, especially if some games could be accepted at the pier or something.
    1 point
  6. Tell me about it. Reading my 2800 Historea Legum et Antiquitates Juris book (History of Law), 1700 Criminal Procedure Law, and 2300 pages Administrative Law and Administrative Procedure books right now >.< Law students struggles. I have read more than 400 books so far and I have my own little library. History, psychoanalytic, thrillers, anything legal related etc.
    1 point
  7. Customization is quite in depth and I'm sure you all will love it at launch!
    1 point
  8. 1 point
  9. What up my brotha!!
    1 point
  10. I don't even know what BPS stands for. Which faction is that?
    0 points
  11. Problem with that is copyright. If LSRP is making money off of the server, they can't be using real life brands. It's a fast road to lawsuit-valley.
    0 points
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.